高速加工中心的特點和優勢

2016-08-29 15:15:10 eycms 31

  高速加工中心一般配有電主軸,在使用過程中從啟動到達額定轉速,或從額定轉速到停止所耗用的時間相對較少。用一臺高速加工中心在相同的時間內完成的工作量相當于普通加工中心1.5臺-2臺。能夠有效的減少車間使用設備數量,減少投資,占地面積,節約能源,縮減加工成本。這就是高速加工中心的特點和優勢。
  The high speed machining center is usually equipped with an electric spindle, which can be used for a relatively small amount of time from start-up to rated speed, or from rated speed to stop. The amount of work completed in the same amount of time with a high speed processing center is equivalent to 1.5 to 2 common processing centers. Can effectively reduce the amount of equipment used in the workshop, reduce investment, cover area, save energy, and reduce the processing cost. This is the characteristics and advantages of high speed machining center.
  什么樣的加工中心才能算高速加工中心?在采購高速加工中心時應留意如下技術參數:
  What kind of processing center can be counted as a high-speed processing center? The following technical parameters should be noted when purchasing a high speed machining center:
  1.高主軸轉速:每分鐘不能低于8000轉速
  1. High spindle speed: no less than 8000 RPM per minute
  2.高進給速度:每分鐘要在15000mm以上才能保證足夠的進給量
  2. High feed speed: more than 15000mm per minute to ensure sufficient supply 
  3.高移動速度:每分鐘不低于55000mm
  3. High moving speed: no less than 55000mm per minute
  4.高加(減)速度:0.5g-1.5g
  4. High plus (minus) speed: 0.5g-1.5g
  5.高定位精度、重復定位精度:0.006mm-0.008mm
  5. High positioning accuracy and repeat positioning accuracy: 0.006mm-0.008mm

標簽: 所有標簽
分享按鈕 2345影视大全污片